ISO Tank Container
Danteco offers T11 Type 24/25/26,000-litre ISO Tank Containers.
Our tank container fleet is separated for four transportation purposes: tank containers for liquid chemical products, tank containers exclusively for liquid foodstuff and tank containers for bitumen and fuel liquid products.
All tanks are of the highest quality design and construction, and conform strictly to the latest international approvals.
- Customer-orientated, flexible service
- Complete range of capacities and types
- Top-quality design and construction
- Tanks are available from major locations
- Available for sale and lease
ISO TANK: 25000-Litre UN Portable Tank T11
6058mm x 2438mm x 2591mm, General Purpose Tank Container,
6.0 bar test pressure, insulated, steam heated.
Year manufactured: "New Build"
|Capacity||25000 LTR||5500 US GALLONS|
|Maximum Gross Weight||34000 KG||74957 LBS|
|Tare||3680 KG||8113 LBS|
|Working Pressure||4.0 bar||58 psi|
|Test Pressure||6.0 bar||87 psi|
|Steam Working Pressure||4.0 bar||58 psi|
|Steam Test Pressure||6.0 bar||87 psi|
|Relief Valve Set Pressure||4.4 bar||63 psi|
|Ambient Temp. Range||-40°C to +65°C||-40°F to +149°F|
|Maximum Cargo Temp||130°C||248°F|
|Shell Material||Stainless steel, ASTM A240 316 / 316L low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. Thickness nominal 4.2mm shell +0.1 corrosion allowance, 4.65 ends, and equivalent 6mm mild steel in accordance with regulations.|
|Design Code / Approvals||ASME, section VIII, division 1 where applicable and IMDG T11, US Dot CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO.|
|Manlid||500mm (20") diameter, 8 point fixing, 14mm x 12mm seal.|
|Calibration||Volumetric stainless steel chart.|
|Airline / Vapour||40mm (1½") ball valve Fort Vale, outlet 1½ " BSP, stainless steel screw cap.|
|Relief Valve||80mm (3") DN65 flanged Fort Vale Mk111 super maxi high flow, operating pressure 4.4 bar, weld-in flange plugged provision for second flanged valve.|
|Top Outlet||Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.|
|Bottom Discharge||80mm(3") Fort Vale highlift foot valve and FV clamped 80mm (3") butterfly valve. Outlet 3" BSP screw thread and cap.|
|Remote Closure||Bottom valve closure device fitted together with provision of fusible link.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Steam Heating||7.5m² (80'²) effective surface area, eight external steam ducts, ¾" BSP screw inlet / outlet and cap. Maximum pressure 4 bars. Tank max temperature 130°C.|
|Insulation||50mm (2") total comprising 50mm mineral wool 55 kg/m3 (CFC free) semi rigid stiffened at top and covered by 0.8mm grade 5251 H44 aluminium pre-painted cladding, estimated thermal value 37 Kcal/hr at 30°C.|
|Compartment||Open stainless steel spill compartments with provision for optional lids.|
|Document Holder / Earth||Fitted rear end, suitable for shipping papers, MSDS etc. Earth located at rear.|
|Data Plate / Markings||Data Plate / Markings.|
|Walkway||Aluminium Q grating with access to top fittings, extending to front end. Provision for optional handrail. Ladder at rear rhs.|
|Temperature Gauge||80mm dia dual scale -20°C to 200°C / 0 to 400°F.|
Why use ISO tanks?
Why use ISO tanks?
Tanks deliver both real time and labor savings, while making door-to-door transport a smooth operation.
Loaded and discharged using normal in-plant liquid transfer systems, tanks are lifted using standard ISO equipment. The switch between road, rail and sea or storage at destination is thus safe, straightforward and economical.
T11 tanks are approved to the highest standards by international statutory authorities for the safe transportation of a wide range of liquid products and in particular the following:
• with a flashpoint of less than 0° C
• Certain high hazard toxins or corrosives
• Spontaneously combustible materials
• Cargoes which are dangerous when exposed to moisture
• Oxidizing substances
Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.
Also, cargo in container must conform to the dimensional regulations and laws stipulated by the host country, thus payload capacity may be affected.
For more information or assistance, please contact our customer service.