|ISO Size||20FT ISO - 6058mm x 2438mm x 2591mm|
|Material Tank Body||Mild / Carbon Steel|
Approvals by Lloyd's Register, the Netherlands
Our bitucontainers (bitumen box containers) can be divided into five purposes: bitumen containers for bitumen storage, short-sea, deep-sea shipping, rail transport, and road transport. Danteco Industries BV offers new and used bitucontainer 28,500 liters/volume bitumen box containers for direct sales and long en short leasing. Suitable for storage, transport, and logistics of bitumen, asphalt bitumen emulsion, heavy fuel oil (HFO), heavy crude oil, and polymer-modified bitumen (PMB / PMBs).
All Danteco bitucontainer(s) - bitumen box containers are of the highest quality design and construction and conform strictly to the latest international approvals.
Please note that in certain exceptional cases, the containers operated by Danteco Industries BV may have specifications that differ from the descriptions above. Also, cargo in a container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please get in touch with our customer service.
TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, flame tube type (direct fire). The design allows partial payloads to be carried, fitted with baffle plates. **Also available with thermal-oil and electrical heating system**
CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1
6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.
NOMINAL 28,5CBM VOLUME - LLOYDS REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT
|Nominal Capacity Tank||28500 LTR||(7530 US GALLONS) 6270 GALLONS|
|Maximum Gross Weight||34000 KG||74960 LBS|
|Tare||6050 KG||13340 LBS|
|Working Pressure||0.30 bar||4,35 psi|
|Test Pressure||0.55 bar||7,98 psi|
|Relief Valve Set Pressure||0.32 bar / -0.21 bar/vac||4,64 psi / -3 vac/psi|
|Bursting Disc Setting||0.35 bar||5,08 psi / -3 vac/psi|
|Ambient Temp. Range||-20°C to +65°C||-20°F up-to +149°F|
|Maximum Cargo Temp||200°C||392°F|
|Shell Material||Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm|
|Design Code / Approvals||BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),|
|Man lid/Hatch Cover||500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.|
|Calibration||Volumetric chart, nominal capacity 28,340 liters available.|
|Airline / Vapor||40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.|
|Relief Valve||65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.|
|Bursting Disc||DN80 (3") 0.35 bar (32 psi) setting.|
|Top Inlet||Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.|
|Bottom Discharge||Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Flame Tube Heating||Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.|
|Insulation||50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")|
|Document Holder / Earth||It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.|
|Data Plate / Markings||Stainless steel data plate detailing specifications fitted rear end.|
|Frame||The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.|
|Ladder||They have intergraded at the front end.|
|Temperature Gauge||Analogue gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.|
|Sensor Socket||1/2" BSP fitted rear end|
|Color RAL||9005 or custom|
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Danteco Industries BV offers a new build production stationary bitumen tank 27,200-liter for sale and renta...Show More
Longkou Xinlong Machinery Equipment Co., Ltd. is a container Lashing Equipment & Cargo Secu...Show More
© COPYRIGHT 2023 - DANTECO INDUSTRIES BV