20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

Danteco Industries BV offers a new build production stationary bitumen tank 27,200-liter for sale and rental. Our stationary bitumen tank and bitutainer are high-performance storage tanks suitable for bitumen storage yet intermodal transport, short-sea, deep-sea shipping, inland waterways, rail transport, and road transport. Suitable storage and transportation, bitumen logistics, asphalt bitumen emulsion, heavy fuel oil (HFO), crude oil, and polymer-modified bitumen (PMB / PMBs). All Danteco bitutainers are of the highest quality in design and construction and meet the latest international approvals.

Please note that in certain exceptional cases, tank containers operated by Danteco Industries BV may have specifications that differ from the above descriptions.

Also, the cargo in the container must comply with the dimensional regulations and laws of the host country, which may affect the payload. For more information or assistance, please contact our office.

TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-walled (bundled) and SUPER insulated, baffle plates, flame pipe type (direct flame). The design allows for partial loads to be carried with baffle plates. **Also available with thermal-oil and electric heating system**

  • Capacity: 27200L / (7185 US Gallons) 5983 Gallons Imp. 
  • Bitumen Tank Stationary Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Flame Tube Design (direct fire)
  • 3" and 4" outlet Guard Brand Bottom Discharge 100MM 9DN100) Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • "SUPER" Insulated 150mm
  • Approvals by Lloyd's Register, the Netherlands


CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1

6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.


  Metric Imperial
Nominal Capacity Tank 27200 LTR (7185 US GALLONS) 5983 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 5800 KG 12786 LBS
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
Document Holder / Earth It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They have intergraded at the front end.
Temperature Gauge Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

20FT Hydrogen Peroxide H2O2 Tank Container

20FT Hydrogen Peroxide H2O2 Tank Container

Hydrogen Peroxide - H2O2 Tank T14 is a tank suitable for transporting and storing peroxide and highly hazardous ...

Show More
Bitumen Bag Decanter

Bitumen Bag Decanter

The Danteco Bitumen Bag Decanter, also named big bag bitumen melting machine and bitumen melter. Via direct-fire...

Show More
Container Lashing Equipment & Cargo Securing Devices

Container Lashing Equipment & Cargo Securing Devices

Longkou Xinlong Machinery Equipment Co., Ltd. is a container Lashing Equipment & Cargo Secu...

Show More
Cement Tank Container

Cement Tank Container

Pneumatic operated Cement Tank for bulk powder cement is approved by international statutory authorities to...

Show More